Products
Clear Filter

Welcome to BloxLimited, where your imagination takes center stage and lighting becomes an art form.
LUCI
LED STRIP
INDOOR LIGHTING
LFY7-T1000W-W-CL-I-10


Compare
SPARK
RECESSED DOWNLIGHT
INDOOR LIGHTING
SPK8240-T1-40W-60°

Recessed fixed downlight made of aluminium housing with white powder coated finish. Inner reflector available in mirror chrome, white and black color. Cut-out Ø150mm. For indoor use. IP20.

Compare
WAKO
LED STRIP
OUTDOOR LIGHTING
KK072-15W
Wako Koki Flex LED strip high illuminance, uniform light distribution, slim size with IP65 / IP66 protection. Suitable for architectual lighting, indirect lighting, indoor lighting and decorative lighting application.
Compare
ARTEMIDE
TRACKLIGHT
INDOOR LIGHTING
FU11204APP
Funivia is a functional network of relationships, material and immaterial, free and inclusive capable of evolving through the cooperation of its elements. It starts from the essential, with a "mountaineer's" spirit it discovers a new level of freedom of light in spaces. A rope, the cable that carries energy, and nails, the fastening elements in space, are the basis for going far, overcoming the limits given by the rigidity of systems. The cable, with a special minimal cross-section but capable of supporting both mechanical and thermal stresses, is the energy distribution channel of the system and the load-bearing element on which the light elements are connected, it runs seamlessly in space transcending the limits of three dimensions. It is attached to the side, floor or ceiling through mechanical elements. It runs inside them without requiring to be cut and thus interrupted, drawing in space a network of regular lines, horizontal or vertical, but also freely inclined. From a single power point it can run indefinitely, the only limit being the power installed on its length. Funivia is not bound to a power grid or a predefined design, it can enter any space at any time and draw light with the utmost freedom, it can generate an extraordinary performance quality even without an ad hoc installation a specific intervention in the space. The light elements hook on the cable thanks to a "bridge" element, a kind of current-stealing lock that mechanically fixes the luminaire and takes energy from the cable. Also in this digital network each luminaire has its own identity, its own IP address, through which it can be managed with Dali systems or with Artemide App It is a sustainable approach at the level of production, distribution, installation, consumption, use, integration of elements that already exist without necessarily calling for the creation of new additional products. Funivia breaks a pattern common to existing lighting systems, breaking out of the rigidity of fixed modules (in space, stock, production).
Compare
LINEALIGHT
WALLWASHER
OUTDOOR LIGHTING
81447W06
Single emission lines for outdoor application. The warm white LED light source with a narrow spot light distribution is composed of 6 powerled LEDs. The device body is made of aluminium 6060 and features a anodised aluminum finish, processed by means of 20 µm anodizing; the diffuser is made of extra clear glass - tempered with a silk-screening treatment. The ingress protection degree is IP67; the total weight is of 2.9 kg. The power supply cable is included and features a 0.17 m length. The device features protection class I and can be wall lights or ceilingmounted. Compliant with the EN 60598-1 standard and its specific provisions.
Compare
XAL
LINEAR DOWNLIGHT
INDOOR LIGHTING
090-7L351A0021 090-7L3020B
Rectangular recessed multi-downlight made of die-cast aluminium; installation without tools in mounting set due to patented ball catch system; rectangular installation housing; with trim jet black; suitable for ceiling thickness of 2-25 mm; equipped with tree wallwasher light elements; asymmetrical light distribution with precise radiation characteristic; high quality reflector with micro-faceted, aluminum-vaporised surface; chrome reflector; passive cooling of the LEDs through improved heat sink geometry; light colour 3000 K; binning initial MacAdam ≤ 3 SDCM; CRI ≥ 90; min. 90% of luminous flux after 50000 operating hours; energy-efficient high power LEDs with very good colour rendering; degree of protection IP20; PC2; incl. converter, non dimmable; through wiring connection box, 3-pole or 5-pole, available as an accessory; accessories are listed separately; light source not replaceable; control gear replaceable by an authorized professional; clank-free
Compare
NEKO
SPIKE LIGHT
OUTDOOR LIGHTING
NEPTUNE_NU3C-8272412N-DN

Projector Light round made of aluminium; external 24VDC LED Driver is required; Compatible with On-Off.  System Power 12W; dimensions Ø84mm x 117mm; luminaire's weight is approximately 1150g; CCT 2700K with an System Output of 850lm; decent color rendering at an index of CRI80; after a lifetime of 50000h L80B10 min. 80% of the luminous flux with energy efficient CREE LED Chips; 5 years warranty; beam characteristic with 24° beam angle; UGR<19; degree of housing protection IP67; light source replaceable by a qualified electrician; driver replaceable by a qualified electrician; including installation stake 

Compare
SPARK
SURFACE MOUNTED DOWNLIGHT
INDOOR LIGHTING
SPK5141-12W-36D

Surface mounted downlight luminaire body made of aluminium housing with white powder coated finish. Black finish and honeycomb accessory available upon request.

Compare
CDN LIGHTING
RECESSED DOWNLIGHT
INDOOR LIGHTING
HS6050R 7W15D


Compare
LINEALIGHT
RECESSED DOWNLIGHT
INDOOR LIGHTING
90823W15
Single emission downlights for indoor application. The warm white LED light source is composed of 1 powerled LEDs. The device body is made of die-cast aluminium en ab - 46100 and features a embossed black ral 9005 finish, processed by means of powder coating; the diffuser is made of uv resistant polycarbonate. The ingress protection degree is IP44; the total weight is of 0.047 kg. The power supply driver is not provided and is to be ordered separately. The power supply cable is included and features a 0.170 m length. The device features protection class III and can be ceiling-mounted, with a 46 x 46 mm hole (in plasterboard). Compliant with the EN 60598-1 standard and its specific provisions.
Compare
ELR
RECESSED DOWNLIGHT
OUTDOOR LIGHTING
ELR35PLE-BM.8.55.R1-AQ.DA


Compare
XAL
SURFACE LINEAR LIGHT
INDOOR LIGHTING
046-47M8538H


Compare
CDN LIGHTING
RECESSED DOWNLIGHT
INDOOR LIGHTING
HS6090 18W36D


Compare
APEX
LED STRIP
INDOOR LIGHTING
AP805_5W_TW

Flexible LED Strip in 120° beam, 160 LEDs/m. 50mm cut length and 24V voltage. CCT available from 2300K - 6000K. Suitable for Indoor and Outdoor application. DIMENSION : L1000mm x W5mm

Compare
LUCITAG
UNDERWATER LIGHT
OUTDOOR LIGHTING
MINI FOUNTAIN

Specially designed for 360 fountain jet installation, The body is made from marine grade Stainless Steel 316, Various colors are available. Safe voltage 12V DC.

Compare
Join our Newsletter and stay up to date. Only the best inspiration, news, and content with Blox.
The new way of providing valuable solutions from design, products search, supply chain, installation services and lighting subscription.
Pages
Playbook
Playground
Showcase Blog About Us
Contact Us
© 2026 Bloxlimited. All rights reserved.